The SFRplus chart: description and how to photograph it Watch on YouTube. Download 1080p/720p/540p. Purchase SFRplus Test Charts from the Imatest Store. Imatest SFRplus performs highly automated measurements of several key image quality factors using a specially-designed test chart that may be purchased from the Imatest store (recommended) or printed on a high-quality inkjet printer. The user does not need to manually select Regions of Interest (ROIs). Image quality factors include Sharpness, expressed as Spatial Frequency Response (SFR), also known as Modulation Transfer Function (MTF), which can be mapped over the entire image, Noise (limited: eSFR ISO has more detailed […]

Monitor patterns for Light Falloff, SFR, Distortion, and monitor calibration Introduction Screen Patterns displays a variety of test patterns on monitors, preferably on LCD flat screen monitors. It may become more useful as cost-effective ultra-high resolution (4k+) monitors become available. It is opened by clicking on Screen Patterns on the right of the Imatest main window. Most patterns (except perhaps Monitor calibration) perform best with the window maximized. You may need to redraw the pattern after maximizing (or resizing) it by selecting the pattern or changing one of the settings. These patterns are offered as a convenient alternative to the […]

From the Imatest main window, click on SFR or Rescharts on the upper left. SFR allows you to analyze multiple regions and to run batches of files. Rescharts (1. Slanted-edge SFR) allows you to analyze single regions in a highly-interactive interface. ISO 12233:2000 chart images, which have contrasty (≥40:1) slanted-edges, can be downloaded from dpreview.com reviews, typically in the last page titled “Compared to…,” and from Imaging-resource.com reviews, typically on the page labeled “sample images.” We no longer recommend such high contrast images, because saturation can lead to inaccurate results. 4:1 or 10:1 contrast images are much preferred. Image file […]

Setting up and photographing SFR test charts Imatest SFR measures spatial frequency response, also known as the Modulation Transfer Function (MTF), of digital cameras using a slanted-edge (light-to-dark) target, as described in Sharpness: What is it and how is it measured? Although it doesn’t provide the as strong a visual indication of MTF as wedge or sinusoidal chats (such as Log Frequency), it provides a more accurate quantitative measurement and uses space much more efficiently. Old ISO 12233:2000 test chart (left) with Imatest SFR cropping indicated by the red rectangle New ISO 12233:2014 test chart (right– supported with a high […]

Running Rescharts slanted-edge modules (Interactive and Auto mode settings) Imatest Rescharts slanted edge modules— SFRplus, eSFR ISO, SFRreg, and Checkerboard— perform highly automated measurements of several key image quality factors using specially-designed test charts. This document shows how to run these modules in Rescharts and how to save settings for automated runs.  Four introductory pages —  SFRplus, eSFR ISO, SFRreg, and Checkerboard — describe each module and explain how to obtain and photograph the chart.  Rescharts Results Part 3 and Part 4 illustrate the results. Selecting files – Setup window – ROI selection & analysis – Edge ID files – More settings window […]

Running eSFR ISO – Rescharts eSFR ISO – eSFR ISO setup window – Speeding up – More Settings window – Secondary Readouts – Gamma – Auto mode settings – Warnings – eSFR ISO summary Running eSFR ISO Imatest eSFR ISO performs highly automated measurements of several key image quality factors using one of three versions of the ISO 12233:2014 Edge SFR chart: Standard, Enhanced, or Extended. This document shows how to run eSFR ISO in Rescharts and how to save settings for automated runs. Part 1 introduced eSFR ISO and explained how to obtain and photograph the chart. Part 3 […]

Imatest eSFR ISO results Imatest eSFR ISO performs highly automated measurements of several key image quality factors using one of three versions of the ISO 12233:2014 Edge SFR chart: Standard, Enhanced, or Extended. Unlike most other modules, the user never has to manually select Regions of Interest (ROIs). Image quality factors include Sharpness, expressed as Spatial Frequency Response (SFR), also known as the Modulation Transfer Function (MTF), Noise, measured from the grayscale patches surrounding the center of the chart, includes all types of noise calculated by Color/Tone Interactive and Color/Tone Auto (standard pixel noise, chroma noise, scene-referenced noise, sensor (raw) […]

Interactive Analysis of Resolution-Related Charts New in Imatest 2020.1 : Shannon information capacity from Siemens Star charts  Introduction – Supported charts – SFR – SFRplus – eSFR ISO – SFRreg – Checkerboard Getting Started – Rescharts Window  –   Rescharts modules Slanted-edge SFR – SFRplus – Log frequency (simple) – Log frequency-contrast – Star – Wedge  Random/Dead Leaves – Focus Score Introduction Imatest™ Rescharts is a highly-interactive interface for running several Imatest modules that can analyze images of several different test charts for resolution-related parameters such as sharpness (i.e., Spatial Frequency Response SFR, which is equivalent to Modulation Transfer Function MTF), color moiré, and fine detail lost to software noise reduction. Several chart […]

Imatest Checkerboard performs highly automated measurements of sharpness (expressed as Spatial Frequency Response (SFR), also known as Modulation Transfer Function (MTF)), Lateral Chromatic Aberration, and optical distortion from images of checkerboard patterns (with a recommended tilt angle of 2-7 degrees). The primary advantage of Checkerboard (as compared to Imatest’s other automatically-detected modules) is that it is relatively insensitive to framing. You can zoom in our out as much as you like, as long as there are detectable corner features.  This document illustrates Checkerboard results. Part 1 introduced Checkerboard and explained how to obtain and photograph the chart. Part 2 showed […]

Imatest eSFR ISO performs highly automated measurements of several key image quality factors using versions of the new ISO 12233:2014 E-SFR (Edge SFR) test chart that may be purchased from the Imatest store (recommended) or printed on a high-quality inkjet printer. Region of Interest (ROI) selection is automatic, based on user-entered criteria (similar to  SFRplus, which it closely resembles). Image quality factors include: Sharpness, expressed as Spatial Frequency Response (SFR), also known as Modulation Transfer Function (MTF) Lateral Chromatic Aberration Distortion  Simple low-order calculations; less accurate than the SFRplus or Checkerboard). Modules are compared in Distortion: methods and modules. Noise, measured […]

Running Checkerboard (Interactive and Auto mode settings) Imatest Checkerboard performs highly automated measurements of sharpness (expressed as Spatial Frequency Response (SFR), also known as Modulation Transfer Function (MTF)), Lateral Chromatic Aberration , and optical distortion from tilted checkerboard images.The primary advantage of Checkerboard is that the field of view, i.e., the framing, does not need to be tied to the chart size (as it does with SFRplus and eSFR ISO). You can zoom in as much as you want as long as there are sufficient edges to analyze, and you can zoom out as far as you want (though the […]

Measure visible sensor defects The Human Visual System – Algorithm – Instructions – Settings window – Filtering and threshold – Display options – Defective pixels – Tuning – Results Blemish Detect detects visible sensor defects (typically blurred (dark) spots caused by dust in front of the image sensor, but light blemishes can also be detected). To ensure that only visible blemishes are flagged— and blemishes below the threshold of visibility are not— the image is filtered by a response function derived from the Human Visual System (HVS). Filter settings are adjustable for a wide range of applications and viewing conditions. Blemish detect also includes all […]

Introduction This page illustrates how to use image acquisition with ON Semiconductor DevWare, which is a part of ON Semiconductor’s DevSuite. Imatest also supports other development systems. Load images directly from DevWare. This eliminates the need to capture images separately, store them, then load them individually into Imatest, dramatically improving productivity. Note: As of Imatest 5.0 image acquisition capabilities were added to Imatest Master and Imatest IS was discontinued. Learn more.  Download and Install Software To download Imatest Master software, go to www.imatest.com/products/imatest-master/ Download and open the self-extracting executable (Imatest-IS-3.n.exe). This will install Imatest and the Matlab Compiler Runtime (MCR), which is required for […]

Imatest Pass/Fail Operation and Reference Introduction Imatest can return pass/fail (P/F) results for industrial inspection or for any tests where pass/fail results are required. Although pass/fail is primarily intended for IT (DLL and EXE), it works with GUI-based versions of Imatest (except for Studio), where it can be particularly useful for testing P/F thresholds for Imatest IT. Starting with Imatest 4.0, the Pass/Fail monitor lets you examine P/F results in detail. Getting started – Summary – Pass/fail settings file – Pass/Fail Reference Slanted-edge (SFRplus, etc.) settings Blemish and Uniformity settings Getting started with Pass/Fail Determine the measurements to use for […]

A pattern on an LCD screen may be used for SFR measurements using a pattern generated by the Imatest Screen Patterns module, which has several patterns to choose from. These patterns are convenient, but somewhat limited in usefulness because an LCD screen can only cover a fraction of the image frame, hence you can’t produce a good map the camera’s MTF response. Screen Patterns The Screen Patterns module is opened by clicking on Screen Patterns on the right of the Imatest main window. When it first comes up, it is completely blank (for use with Light Falloff). Select SFR: Quadrants […]

How Imatest IT/.NET works Imatest IT/.NET (Industrial Testing .NET) is a Microsoft .NET Framework library that allows developers to access Imatest‘s powerful image quality analysis tools via calls to methods residing in a .NET DLL library. The library methods perform the same calculations as the corresponding GUI-based Imatest Master modules.  Imatest IT/.NET is compatible with .NET Framework versions 4.5 and higher.  Fourteen modules are available: SFR   SFRplus   Star Colorcheck   Stepchart   Wedge Uniformity (Light Falloff)   Distortion   eSFR ISO Blemish   Dot Pattern   Multitest OIS   Random     Imatest IT/.NET is a complete package that includes the module libraries, […]

How Imatest IT/EXE works Imatest IT/EXE (Industrial Testing EXE; formerly API/EXE) is a set of standalone programs initiated by DOS calls, which can be issued by a test system. The programs have the same functionality as the corresponding Imatest Master modules, but they operate without user intervention, making them suitable for use in automated testing systems. They are represented by the blue box in the lower right of the figure below. Imatest IT/EXE flow diagram The test system interacts with the IT/EXE programs through files specified in the DOS command line— primarily an image file and an INI control file […]

Test Item   Imatest Module

Introduction Watch on YouTube. Imatest IT (Industrial Testing) is a set of Application Programming Interfaces (APIs) that allow developers to access Imatest’s powerful image quality analysis tools in their own custom applications. Imatest IT is available for 64-bit Windows, MacOS and Linux, and includes libraries for use with C, C++, Python, Objective-C, .NET (Windows only – including C# and Visual Basic), and LabVIEW. IT also contains standalone executables that can be called from a command line or script. The API libraries perform the exact same calculations as the corresponding GUI-based Imatest Master modules. Imatest IT is a complete package that […]

Imatest software can measure a great many digital camera image quality factors from test chart images. If you’re just getting started we recommend that you explore the Image Quality factors page. The two most popular modules, SFRplus and eSFR ISO, can measure a great many image quality factors from single test chart images. Other modules and charts let you meet a wide variety of testing challenges. The Imatest workflow – Download & trial – Questions – Interactive vs. Fixed modules  Selecting the chart and module – Running Imatest – Imatest main window  Saved (INI) settings – Window and font size – […]