View Release Notes
For beginners: We recommend these web pages for getting started:
Introduction to the new Imatest Main Window (New in 2021.2)
Image Quality Factors – Using Imatest – Getting started – Imatest Updates and Features
VIDEOS – Online training – Consulting – News
| Offline documentation | Download the website for offline view (with a web browser) |
| Image Quality |
IQ factors (KPIs) measured by Imatest, with links to detailed descriptions and instructions. |
| Sharpness | Introductions to sharpness and sharpening; comparisons of different charts; chart quality limitations & how to overcome them |
| Other IQ factors | Noise, SNR, Temporal noise, Dynamic Range (DR), Chromatic Aberrations, Distortion, Veiling glare, Shannon information capacity & Image information metrics, etc. |
| IQ Utilities | Image Processing, SSIM, Image Statistics, Radial geometry |
| Getting started | Why Imatest?, Test charts, Lighting, Image capture technique, Setting up your lab, Using Imatest software |
| Start using Imatest software | Installation, Using Imatest, Image file formats & devices, Activation/Deactivation |
| General Instructions | Special standards, Supported devices, Test manager, Raw files, Test lab, INI files, Pass/Fail Monitor |
| Acquiring images | Files, formats, devices, and utilities for acquiring images |
| Knowledge Base highlights | Links to articles for troubleshooting, activation, and general advice on operation. |
| Troubleshooting | What to do when Imatest doesn’t work as expected |
| Slanted-Edge sharpness modules | SFR (manual ROIs), SFRplus, eSFR ISO, SFRreg, Checkerboard (auto ROI detection) The four auto-detection slanted-edge sharpness module are compared here. |
| Other sharpness modules | Log F-Contrast, Star, Random/Dead Leaves/Spilled coins, Wedge, Sharpness utilities & postprocessors |
| Sharpness utilities & postprocessors | MTF Compare, Image stabilization, Batchview, Find ShGarpest Files |
| Tone, Color, Noise & Dynamic Range modules | Color/Tone (Interactive & Auto), CCM (Color Correction Matrix), CDP, Contrast Resolution, Colorcheck, Stepchart, Measuring patches, Gamutvision for evaluating ICC color profiles and gamut mapping. |
| Spatial & Flat field modules | Flatfield, Flatfield Interactive, Distortion, Dot pattern, Testing displays |
| Miscellaneous modules and utilities | Lighting Control, Arbitrary charts, Device Manager, Auto White Balance/Exposure/Focus (AWB, AE, AF), Printing & displaying test charts, Rename Files, Educational Apps, Database |
| Industrial Testing edition | Modules, Instructions for various interfaces (EXE, C, C++, Python, .NET), INI file reference, Pass/Fail, Operator Console, Speedup |
| Appendix | FAQ, Versions, Troubleshooting, Change Log, INI file reference, License |
Image Quality
General — Introduction to Image Quality Factors (Key Performance Indicators – KPIs)
Image quality factors – Overview and Imatest measurements Recommended for getting started.
Introduction – Summary table – Image quality factors – Sharpness – Texture – Noise – Information capacity and metrics – Tonal response – Dynamic range – Color accuracy – Distortion – Uniformity – Blemishes – Exposure accuracy/ISO sensitivity – Lateral chromatic aberration – Stray light (flare) – Veiling glare – Color moiré – Software artifacts – Data compression – Printer quality factors
Sharpness
Sharpness – What is it and how is it measured?
Introduction – MTF – MTF equation – Spatial frequency units – Summary metrics– MTF measurement matrix – comparing measurement techniques – Slanted-Edge measurements – Why a slanted edge? – Clipping – Noise reduction – Interpreting MTF50 – AutoFocus (AF) Speed – Calculation details – Slanted-edge algorithm – Imatest vs. ISO calculation – Links
Sharpening – and Standardized Sharpening for comparing cameras
Introduction – Examples – Oversharpening/Undersharpening – Examples – Unsharp masking (USM) – Links – Standardized sharpening
Comparing sharpness in different cameras – The application: “Image-centric” (for pictorial images) or “object-centric” (for medical, machine vision, etc.) strongly affects how images are compared.
Validating the Imatest slanted-edge calculation
Slanted-edge versus Siemens Star – A comparison of sensitivity to signal processing
Introduction – Images – Raw results – Slanted-edge results – Sinusoidal (Log F-Contrast and Siemens star) results – Extreme sharpening – Summary – Conclusions
Slanted-edge versus Siemens Star, Part 2 – Results for four additional cameras
Slanted edge vs. Siemens star MTF calculations: 2024 white paper
Slanted-edge measurement consistency and repeatability – comparing different ISO speeds and ROI sizes. Incomplete, but still useful.
Nyquist frequency, aliasing, and Color Moire – introducing a color aliasing metric derived from wedges.
Diffraction, optimum aperture, and defocus – Lens aberrations – Diffraction – Pixel response limits and Q – Defocus
Display (Monitor) Sharpness – Display the chart – Capture the image – Analyze – Results – TV Lines – Monitor gamma – CMS systems
Camera Monitor Systems (CMS) – for automotive mirror replacement systems and some endoscopes
LSF (Line Spread Function) correction factor for slanted-edge MTF measurements
Correcting nonuniform illumination in slanted-edge MTF measurements for nonuniformity perpendicular to the edge
Compensating camera MTF measurements for chart and sensor MTF
Introduction – Calculation – MTF compensation files – Applying the compensation – Sensor MTF compensation for measuring lens MTF – Chart MTF measurements
Chart Quality Calculator – determine the suitability of a chart (based on MTF measurements for specific media & print methods) for a specific application
Test chart suitability for MTF measurements – charts for determining the MTF measurement suitability of several media types (inkjet and photographic; reflective and transmissive). Based on Chart Quality Calculator results.
Implicit sharpness assumption (diffraction) – Chart suitability display – Inkjet matte – B&W photo paper – Color LVT | B&W LVT – MTF suitability calculations
Chart Quality Index (CQI) – older (now deprecated) method that relates chart quality and size to MTF measurements. Replaced by Chart Quality Calculator. The Chart Finder is an interactive website for selecting chart size and media.
MTF curves and Image appearance – Correlating measurement with appearance
Introduction – The Slanted-edge test – Reference image – Sharpened images – Blurred images – Sharpened + blurred images – Observations – Sharpness ranking – Links
Acutance and SQF (Subjective Quality Factor): perceptual sharpness measurement
Introduction – Acutance and MTF – Meaning of Acutance & SQF – Measuring Acutance & SQF – The SQF equation – CSF – Links
Other Image Quality Factors
Gamma, Tonal Response, and related concepts – why it’s used, how to measure it, and much more
Introduction – Encoding vs. Display gamma – Why logarithms? – How gamma-encoding increases Dynamic Range – Expected gamma values – Gamma and MTF – Which patches are used to calculate gamma? – Why gamma ≅ 2.2? – Tone mapping – Contrast: ratio, Weber, Michelson – Logarithmic color spaces – Monitor gamma
Introduction – Nonuniformity correction – Measurements – SNR_BW – Appearance – Summary – F-stop noise, Scene-referenced SNR & Dynamic Range – Temporal noise – ISO 15739 – The mathematics of noise – Raw vs. demosaiced noise – Spectrum – Links
Temporal Noise – comparing the two-image and multi-image measurements
Dynamic Range – a general introduction with links to Imatest modules that calculate it.
Sensor vs. System DR – Flare, Charts, Exposure – DR definitions – Transmissive chart – Lightbox – How to measure DR – Minimizing reflections – Contrast Resolution chart – Tips and recommendations – Offsets – More on Flare – Flare light – limited DR – F-stop noise & scene-referenced SNR
Chromatic Aberration – (Lateral Chromatic Aberration) AKA Color fringing
Distortion – Methods and Modules
Three Optical Centers – Centers of sharpness, illumination, and distortion
Introduction – Target – Stepchart measurement – Results – ISO 9358 – ISO 18844 measurements with Uniformity – Contrast Resolution two exposure method
Introduction – Incident light measurement – Modules – Equations – Raw files – Saturation-Based – Standard Output – Related documents
| Information capacity news, video, and links are on Solutions – Image Information Metrics. |
|
The EI2024 paper, Image information metrics from slanted edges, is an excellent introduction to the new metrics. Two 2023-2024 white papers contain the latest information capacity measurements and results, including Edge SNRi and filter design. Introduction to Image Information Metrics is the most concise introduction to image information capacity and related metrics, with minimal equations and technical detail. Image Information Metrics in Imatest is an intermediate introduction to image information capacity and related metrics. Image Information Metrics and Applications: Reference (41 pages) has all the equations and technical detail. It’s the reference for the shorter documents. |
| The Siemens star method, introduced in 2020, is slower but better for observing the effects of image processing artifacts (demosaicing, data compression, etc.). |
Shannon information capacity from Siemens stars (2020) – a figure of merit that combines sharpness and noise
Information capacity measurements from Slanted edges: Equations and Algorithms (2023-4) – figures of merit that combine sharpness and noise, conveniently measured from any slanted-edge, including NPS, NEQ, and SNRi.
Information capacity measurements from Slanted edges: Instructions (2023-4) – instructions on the new calculations.
Image quality utilities let you degrade, enhance, examine, or analyze any image (not just test charts)
Image Processing – Simulate several image processing operations (degradations: blur and noise; enhancements: sharpen, bilateral filter, tone mapping, etc.) and observe their effects on appearance and measurements (MTF, SSIM, etc.).
Operation – Image processing blocks – Displays and analysis – Optical Character Recognition (OCR) – Face and People Detection
SSIM: Structural Similarity Index – Measure image quality degradation and artifacts from signal processing such as compression. Also, measure PSNR.
Image Statistics – Interactively observe image statistics: cross sections, means, noise, SNR, histograms, and frequency spectra.
Radial Geometry – Add or correct distortion, lateral chromatic aberration, or rotation to images.
Getting Started with Image Quality Testing
Why Imatest? | Test Charts | Lighting | Image Capture Technique | Setting up Your Lab | Using Imatest Software
Sample images for several modules from Github
Start Using Imatest Software
Installation – and getting started
Using Imatest – Getting started – Introduction and general instructions Recommended for beginners.
The Imatest workflow – Selecting the chart and module – Running Imatest – Finding Imatest Help – Imatest main window – Window and font size – Three helpful buttons – Raw files – Misc. controls and utilities – EXIF display – ROI Options – Options II – EXIF data settings – Dropdown menus – Figures – CSV & JSON output – License – Tips for successful testing
Image file formats and acquisition devices – Imatest’s many image sources – What to do if an image file fails to read correctly
Standard (interchangeable) image files – YUV & more – Raw files – Video files – Acquisition devices for Imatest
Online Activation | Offline Activation | Online Deactivation | Offline Deactivation | Floating Licenses | Proxy Server
Knowledge base — contains several links to help solve activation issues.
| Please note: Each Imatest license can be activated on only one computer at a time, but the activation can be easily moved between computers, especially if they’re online. You can install Imatest– and keep it installed– on as many computers as you like (Macintosh as well as Windows– your license works for both; you never have to uninstall it). To move the activation to another computer, you’ll need to deactivate it on the old computer then activate it on the new one, following the instructions above. You may do this as often as you like. |
Imatest Instructions – general
Session Logging – Log level controls for display and log files
Target Detection Settings – Settings for guiding automatic detection of targets if default detection fails.
Skype video specification support – Instructions and suggestions
Building a test lab – How to build a testing lab
Introduction – Hardware – Building a Low-Cost Test Lab – Easel – Light measurement – Tripod – Clamps – Putting it together – Targets – Aligning target & camera
Saving and retrieving Regions of Interest (ROIs) – How to save and retrieve ROIs in named files for future use.
Saved settings – Imatest-v2.ini and INI files for use with Imatest IT
Pass/Fail Monitor – Realtime display and update of pass/fail results (useful with Imatest IT)
Acquiring images – Files, formats, devices, and utilities
Image file formats and acquisition devices – Imatest’s many image sources – What to do if an image file fails to read correctly
Device Manager – Connect to cameras, adjust settings and acquire images into interactive modules.
Supported image acquisition hardware for Imatest Image Master
Using Direct Image Acquisition – Acquiring images directly from devices
Android Camera Interface for direct image acquisition
Sony AYA Interface for direct image acquisition
Sony AYA Interface for direct image acquisition
Autobatch – Combine several test images (from different modules) for a single device into an automatic batch run.
The Imatest Functional Interface – A simplified interface for running tests with consistent settings
The Functional Interface – The Editor – Preparing a merge file with the INI editor (may be deprecated in a future release)
Raw files – Imatest modules can analyze raw files directly or after demosaicing.
Knowledge Base highlights – Links to articles for troubleshooting, activation, and general advice on operation.
There are many more links like these on the full Knowledge Base.
Troubleshooting – What to do when Imatest doesn’t work
Slanted-Edge sharpness modules
SFR – Basic analysis of slanted-edges (manual ROI selection)
Using SFR Part 1 – Setting up and photographing SFR targetsUsing SFR Part 2 – Running Imatest SFR
Image file – ROI – Cropping recommendations (ROI size) – Additional input – Secondary Readout – Equations – Gamma – Warnings – Saving – Repeated runs – Excel CSV output
SFR results: – Chromatic Aberration, Noise, and Shannon capacity plot
SFR results: Auto Focus (AF) plot
| Feature | SFRplus |
eSFR ISO |
SFRreg |
Checkerboard |
| Sharpness map detail | High | Medium | Depends on arrangement | High |
| ISO-standard chart design | – | ♦ | – | – |
| Color analysis | ♦ | ♦ | (only for SFRreg center chart) | – |
| Tonal response (OECF) | ♦ | ♦ | (only for SFRreg center chart) | – |
| Noise analysis | Limited | ♦ | Limited | Limited |
| Distortion | ♦ Good | Limited | – | ♦ Best |
| Geometry (rotation, FoV, keystone, etc.) |
♦ | ♦ | – | ♦ |
| Features and recommended uses |
Imatest’s original automatically-detected chart, in use since 2009. Robust and versatile. Some white space recommended above and below top and bottom bars. More spatial and distortion detail than eSFR ISO. |
ISO-standard chart design. Includes wedge analysis and (optional) color patches. Supports detailed noise analysis. |
Several individual charts are typically placed around the image field. For |
Relatively insensitive to framing: can zoom in or out as long as distance is large enough so chart quality is not an issue and there are detectable corners. Well-suited for through-focus measurements. Very accurate distortion measurements. |
♦ denotes strong support; – denotes no support.
SFRplus – Automated analysis of slanted-edges
Using SFRplus Part 1 – The SFRplus chart: features and how to photograph itSlanted-edge test – Advantages – Obtain chart – Framing – No bars – Lighting – Distance – Exposure – Tips – Links
Using SFRplus Part 2 – Running SFRplus
Selecting files – Setup window – ROI selection & analysis area – Edge ID Files – Speeding up runs – More settings window – Secondary Readout – Settings area – Gamma – Chart contrast ratio – Auto mode window – Warnings – Clipping – Summary
Rescharts Slanted-edge results Part 3 – SFRplus edge results
Multi-ROI summary – Edge and MTF – Chromatic Aberration – Acutance/SQF – Histograms & noise – Image, Geometry, Distortion, FoV – 3D Plots – Lens style MTF plot – Edge roughness – Point Spread Function – Summary – CSV & JSON output
Rescharts Slanted-edge results Part 4 – SFRplus other results (tones, color, distortion, etc.)
Pre-distorted and special charts for Fisheye Lenses – with many applications such as automotive rear view camerasIncludes SFRplus, eSFR ISO, and SFRreg charts. Previewing pre-distortion
Introduction – Pre-distorted charts – Running SFRplus & Algorithm – Results – Distortion correction display – Radial plot
Introduction – Test chart – Photograph – Lighting – Run SFRplus – Rescharts SFRplus – SFRplus settings – Auto run options – Display options – Secondary readout – Interpret the results – Batches – Checklist – Links
eSFR ISO – Automated analysis of the ISO 12233:2014 Edge SFR chart
Using eSFR ISO Part 1 – The ISO 12233:2014 E-SFR chart: features and how to photograph it
Slanted-edge test – ISO 12233:2014 compliance – Advantages – Obtain chart – Framing – Lighting – Distance – Exposure – Tips – Links
Using eSFR ISO Part 2 – Running eSFR ISO
Rescharts Slanted-edge results Part 3 – eSFR ISO edge resultsMulti-ROI summary – Edge and MTF – Chromatic Aberration – Acutance/SQF – Histograms & noise – Image, Geometry, Distortion, FoV – 3D Plots – Lens style MTF plot – Edge roughness – Point Spread Function – Summary – CSV & JSON output
Rescharts Slanted-edge results Part 4 – eSFR ISO other results (tones, color, wedge, etc.)
SFRreg – Automated analysis of registration mark patterns
- Test at infinity focus with Long Range projection systems
- Test imaging systems with ultrawide fisheye lenses (>180 degrees)
- Test at very long camera-to-chart distances
- Test at variable distances for Depth of Field.
Using SFRreg Part 1 – Registration mark patterns and how to photograph them
target projection – Chart arrays for fisheye lenses – Center Chart – Obtain and photograph chart – Lighting – Distance – Exposure – Tips – Links
Using SFRreg Part 2 – Running SFRreg
Rescharts Slanted-edge results Part 3 – SFRreg edge results
Multi-ROI summary – Edge and MTF – Chromatic Aberration – Acutance/SQF – Histograms & noise – Image, Geometry, Distortion, FoV – 3D Plots – Lens style MTF plot – Edge roughness – Point Spread Function – Summary – CSV & JSON output
Rescharts Slanted-edge results Part 4 – SFRreg other results (tones, color, distortion, etc.)
Checkerboard – Automated analysis of checkerboard patterns
Using Checkerboard Part 2 – Running Checkerboard
Selecting files – Setup window – ROI selection & analysis area – Edge ID Files – Speeding up runs – More settings window – Secondary Readout – Settings area – Gamma – Chart contrast ratio – Auto mode window – Warnings – Clipping – Summary
Rescharts Slanted-edge results Part 3 – Checkerboard edge results
Multi-ROI summary – Edge and MTF – Chromatic Aberration – Acutance/SQF – Histograms & noise – Image, Geometry, Distortion, FoV – 3D Plots – Lens style MTF plot – Edge roughness – Point Spread Function – Summary – CSV & JSON output
Rescharts Slanted-edge results Part 4 – Checkerboard other results (distortion, etc.)
Other (Rescharts) sharpness modules – Log F-Contrast, Star, Random, Wedge
Using Rescharts – Analysis of resolution-related charts
Introduction – Getting started – The Rescharts window – Rescharts modules – Slanted-edge SFR – SFRplus – Log frequency (simple) – Log frequency-contrast – Star – Wedge – Random/Dead Leaves – Focus ScoreLog Frequency – Analysis of log frequency-varying charts
Introduction – Photographing, running – Color moire – Output – Pattern – MTF – Comparisons – Calculation details – Nyquist, aliasing
Log F-Contrast – Analysis of charts that vary in log frequency and contrast
Introduction – Creating, printing – Photographing, running – Output – Pattern – MTF – MTF/contrast contours – MTFnn
Sharpness and Texture Analysis using Log F‑Contrast from Imaging-Resource – comparing of several different cameras.
Star Chart – Analysis of the Siemens star chart
Introduction – Creating, photographing, running – Output – MTF – MTFnn, MTFnnP – MTF contours – Equations
Random/Dead Leaves – Scale-invariant test charts (including Imatest Spilled Coins)for measuring texture sharpness
Introduction – Obtaining – Photographing – running – Automatic ROI detection – Output – MTF – MTFnn, MTFnnP – Power Spectral Density – Equations & Scale-invariance
Texture examples – More details of Imatest Spilled Coins texture sharpness measurements
Wedge Analysis – Analysis of logarithmic, hyperbolic, or trapezoidal wedge patterns with the Wedge and eSFR ISO modules
Introduction – Recommendations – Instructions – Results – Stability – Limitations & Comparisons – Calculation details – MTF/Nyquist & Aliasing – Logarithmic wedges
Sharpness utilities & postprocessors
FocusField – Use batch results from a range of distances (or apertures) to measure Curvature of Field,
Longitudinal (Axial) Chromatic Aberration, Depth of Field, and lens focal length.
Longitudinal (Axial) Chromatic Aberration, Depth of Field, and lens focal length.
Introduction – Examples – Prepare the test – Range and Increment – Acquire the images – Analyze – Run FocusField – FocusField Settings – Results – Curvature of Field – Depth of Field (DoF) – Longitudinal (Axial) CA – Lens focal length – Stereo (3D) compatibility
Image Stabilization/Sharpness Compare – SFRplus postprocessor for analyzing (Optical) Image Stabilization
and comparing sharpness of different images
and comparing sharpness of different images
Introduction – Operation – Metrics – ResultsBatchview – Postprocessor for viewing summaries of SFR, SFRplus, eSFR ISO, or Checkerboard results
Find Sharpest Files – Find the sharpest files in a batch
Introduction – Operation – Details – Example – Plot
MTF Compare – Compare MTFs of different cameras and lenses (now used infrequently)
Tone, color, and spatial modules
Tone, Color, Noise, and Dynamic Range
Introduction – Getting started – Supported charts – Reference files – The Color/Tone Setup window – Displays and options
Using Color/Tone Auto (Multitest) – Fixed (batch-capable) analysis of color & grayscale test charts
Color/Tone/eSFR ISO Noise – including chroma, sensor (raw), and visual noise
Chroma noise – Imatest Dynamic range – Image sensor (raw) noise and Dynamic Range – Temporal noise – ISO 15739 & CPIQ Visual Noise – ISO 15739 SNR and Dynamic Range – f-stop noise & scene-referenced SNR
Contrast Detection Probability (CDP) – Based on IEEE p2020 automotive image quality standard
Color/Tone Special Charts – Additional charts, including ISO OECF and noise chats and circles arranged on a square
Color Correction Matrix (CCM) Calculate a matrix (usually 3×3) for correcting image colors (often from raw images)
Introduction – Math – Calculating in Color/Tone Setup – Saturation – Applying the matrix 1. in Color/Tone 2. in Image Processing 3. externally with program code
Nonuniformity Correction in grayscale and color chart modules for Color/Tone Auto or Setup, Stepchart, and Colorcheck
Dynamic Range – a general introduction with links to Imatest modules that calculate it.
Contrast Resolution – A special transmissive chart for measuring the visibility of low contrast features in larger fields over a wide dynamic range. Analyzed with Color/Tone Interactive or Auto.
Gamutvision – A module for exploring ICC profiles and gamut mapping — illustrates how colors change when images are moved between files and devices.
Using Gamutvision instructions – Using Gamutvision Part 2: Displays – Gamutvision Table of Contents/Site Map
Black point compensation demystified – Round trips for evaluating printer profile quality
Black point compensation demystified – Round trips for evaluating printer profile quality
What Colorcheck does – Colorchecker colors – Photographing target – Running Colorcheck – Colorchecker reference sources – Output – Temporal noise – Auto White Balance (AWB) – Saving – Links
Colorcheck/Color/Tone Appendix – Color difference algorithms and reference formulas
Color difference formulas – Color ellipses (Delta-C ab, Delta-C 94, Delta-C 2000, etc.) – Color difference visualizer – Chroma correction (corr) – Algorithm – Grayscale and Exposure error (fix in 5.1+)
Photographing the chart – Running Stepchart – Output – Temporal noise – Auto Exposure (AE) – Saving – Dynamic range – Algorithm
Dynamic Range (postprocessor) – Calculate Dynamic Range from several Color/Tone Auto or Stepchart images
Measuring test chart patches – with a Spectrophotometer and one of two software packages
Spatial and Uniformity (Flat field) modules
Using Flatfield, Part 2 – Features in Imatest Master and IS (not in Studio)
Input dialog box – Hot and dead pixels – Color shading – Flatfield profiles – Grid plot – Polynomial fit – Histograms – Noise detail – Spot detection
Using Flatfield-Interactive – Interactive measurement of vignetting and sensor nonuniformity (can be used with direct image acquisition)
Using Flatfield Blemish Detect – Measure visible sensor defects
Flatfield statistics – Measure PRNU & DSNU with methods based on EMVA-1288: Separate fixed-pattern (spatial) noise from temporal noise by processing multiple identical images.
Lightbox Comparison Guide – Comparing lightbox brightness and uniformity
Testing flat screen displays – with Imatest Blemish Detect
Dot Pattern – Analysis of a grid of circular dots
Introduction – Setup – Results
Miscellaneous modules and utilities
Lighting Control – Set up and control DMX lights (Kino Flo) and Lightboxes; monitor lighting conditions with an Isolight puck.
Arbitrary Charts – Analyze a chart layout you have designed yourself.
Device Manager – Connect to cameras, adjust settings and acquire images into interactive modules.
Video: Dynamic measurements – These can also be performed with direct image acquisition.
Test Charts – Create test charts for high quality inkjet printers
SVG Test Charts – Scalable Vector Graphics charts for MTF and other measurements
Introduction: m x n squares – Squares and wedges – USAF 1951 chart – Operation – Options – Output figure – Printing
Using Screen Patterns – Monitor patterns for Light Falloff, SFR, Distortion, and monitor calibration
Introduction – Light Falloff – SFR – Distortion – Monitor calibration – Monitor gamma – Zone plate – SMPTE color bars – Slanted edges – Colorchecker-Stepchart – Squares (checkerboard)
Rename Files – using EXIF data
Image Processing – Simulate several image processing operations (degradations: blur and noise; enhancements: sharpen, bilateral filter, tone mapping, etc.) and observe their effects on appearance and measurements (MTF, SSIM, etc.).
Image Statistics – Interactively observe image statistics: cross sections, means, noise, SNR, histograms, and frequency spectra.
Database – Collect and store important information on image capture conditions, device state, and EXIF metadata
Composite Chart – Create a synthetic test chart from several individual image files. Can be used for Photon Transfer Curves.
Educational Apps – Learning resource for image quality factors and measurements.
Imatest IT – Industrial Testing (non-GUI)
Imatest IT-EXE instructions – Running Imatest IT (Industrial Testing)-EXE
Introduction – Installation – Step 1: Capture Images – Step 2: Configure INI File – Step 3: Call Imatest IT Modules – Step 4: Process Results – Error Handling – Sample Code – Advanced Topics – Troubleshooting
Imatest IT-C instructions – Running Imatest IT (Industrial Testing)-C
Introduction – Installation – Step 1: Capture Images – Step 2: Configure INI File – Step 3: Call Imatest IT Modules – Step 4: Process Results – Error Handling – Sample Code – Advanced Topics – Troubleshooting
Imatest IT-C++ instructions – Running Imatest IT (Industrial Testing)-C++
Introduction – Installation – Step 1: Capture Images – Step 2: Configure INI File – Step 3: Call Imatest IT Modules – Step 4: Process Results – Error Handling – Sample Code – Advanced Topics – Troubleshooting
Imatest IT-Python instructions – Running Imatest IT (Industrial Testing)-Python
Introduction – Installation – Step 1: Capture Images – Step 2: Configure INI File – Step 3: Call Imatest IT Modules – Step 4: Process Results – Error Handling – Sample Code – Advanced Topics – Troubleshooting
Imatest IT-.NET (C#) instructions – Running Imatest IT (Industrial Testing)-.NET (C#)
Introduction – Installation – Step 1: Capture Images – Step 2: Configure INI File – Step 3: Call Imatest IT Modules – Step 4: Process Results – Error Handling – Sample Code – Advanced Topics – Troubleshooting
Imatest IT-.NET (Visual Basic) instructions – Running Imatest IT (Industrial Testing)-.NET (Visual Basic)
Introduction – Installation – Step 1: Capture Images – Step 2: Configure INI File – Step 3: Call Imatest IT Modules – Step 4: Process Results – Error Handling – Sample Code – Advanced Topics – Troubleshooting
Imatest IT Parallel (IT-P) – Accelerating Imatest IT by performing tests in parallel
Imatest INI file reference – Reference to INI files for IT/EXE and IT/DLL users (sections used in several modules)
Direct Read Mode – Pass image data directly into Imatest IT, without writing to a file on disk
Implementing Pass/Fail – Setting up Pass/Fail criteria and Pass/Fail Reference. For Imatest IT and GUI versions.
Pass/Fail Monitor – Realtime display and update of pass/fail results (useful with Imatest IT)
Operator Console – User interface for production environments
Imatest IT Knowledge Base – Articles about Imatest IT
Appendix
FAQ – Frequently Asked Questions
Cross-reference tables – Tables to help you navigate Imatest
Version comparison: Studio vs. Master – Which is right for you?
Troubleshooting – What to do when Imatest doesn’t work
Installation problems – Problems after install – Missing DLLs – Runtime problems – Corrupted INI file – Command (DOS) window – A module has stopped working – Diagnostics runs – Path conflicts
Imatest Change Log – Imatest release history
Default INI Folder – Location on your computer of resource files used by Imatest
License – The Imatest End User License Agreement (EULA)
Index of the Table of Contents
Image quality — Sharpness — Other IQ factors — IQ Utilities — Getting started — Imatest Instructions – general —
Troubleshooting — Knowledge Base highlights — Slanted-Edge sharpness modules — Other sharpness modules —
Tone, Color, Noise & Dynamic Range modules — Spatial & Uniformity modules —
Miscellaneous modules and utilities — Industrial Testing edition — Appendix